English
English
Español
Français

Sign Up for Our E-News!

Join over 18,000 other roofers who get the Week in Roofing for a recap of this week's best industry posts!

Sign Up
Bitec - StrongHold Sidebar Ad
ServiceFirstSolutions-Grow-Sidebar
IKO - Sidebar - Summit Grey
APOC - CCS Sidebar - ProProgram - June
The Glo Group - Sidebar Ad - Elevate Your Brand - Ad 2
CT_CimateFlex_Infographic_FINAL_2.jpg
English
English
Español
Français

What's best for your metal roof?

Roof Hugger What
September 13, 2024 at 9:00 a.m.

By Roof Hugger. 

Understanding the true cost of your roofing decision. 

When it comes to extending the life of your metal roof, the choice between applying a coating and opting for a retrofit metal roof can make all the difference. While coatings might seem like a quick fix, the reality of their performance and longevity often tells a different story. Before you decide, we here at Roof Hugger know it is crucial to explore the specifics of what each option entails and understand the long-term implications for your building's integrity and value.  

Spray applied coating 

Metal over metal retrofit 

There are some important differences to point out when comparing coating to retrofitting with a new metal roof.  

Coatings: Did you know there are two different types of coatings, standard roof coating and liquid applied roofing? They come in a variety of materials: elastomeric, bituminous, acrylic, epoxy, silicone and others.  

Standard roof coatings 

Standard roof coatings are the most commonly quoted materials to a prospect with a metal roof issue. They are often 5-30 mils in thickness and sold as method to stop leaks by “sealing” the old roof. That reasoning could not be farther from the truth, however. Standard coatings are intended to maintain the life of the existing roof finish by protecting it from UV exposure and increasing reflectivity. Coatings are not intended to be a weathertight barrier.  

Coatings are a thin, short-term, sacrificial barrier, designed to protect the existing metal panel finish from further deterioration and they require regular and periodic maintenance to provide that protection. Coatings can add reflectivity to the existing roof but again they need regular maintenance to keep that reflectivity.  

Like all coatings, the proper cleaning and prep of the existing roof is critical to getting a good result. Proper cleaning for good adhesion and a uniform spray application are difficult to achieve. Pinholes, blisters, edge gaps and other imperfections are common. 

Generally, these products provide minimal if any value to the building owner who is most likely trying to deal with a leaking roof issue. 

Liquid applied roofing products 

Liquid (or fluid) applied roofing products are specifically designed to be a water barrier between the elements and the existing metal or other roofing materials. These systems are significantly thicker (30-60 mils) and significantly more expensive. They have similar cleaning, preparation and application issues as compared to standard coatings. They are typically installed in multiple layers and may have a primer, base coat, reinforcing fabric, weather coat and a top reflective coating. 

The cost of these systems can be 50% - 70% the cost of a new retrofit metal roof and coatings do nothing to help meet the current building codes. They also can hide significant structural issues created by failing fasteners or improperly supported roof equipment or accessories. 

Fastener caps are frequently used to cover corroded fasteners and panel defects but can also hide the structural problems of loss of diaphragm strength and panel uplift. (see photo) 

In the snow regions of the country, existing metal roof panels often do not meet today’s current snow drift load standards. Panels that suffer from overloading frequently deflect excessively and result in excessive accumulation of snow, water ponding and/or overloading of the purlins. These products do nothing to help this condition. When comparing coatings to a metal recovering, take the time to understand exactly what it is you are buying, what it will do and how long it will last. 

A new metal roof is an investment in the future life of the building. It is the ideal platform for future photovoltaics. It complies with all current codes and can have a 60 year or more service life. 

Coatings are simply a short-life and costly products that do nothing to enhance the insurability or longevity of the building. Yes, a new metal roof is expensive but over the life of the building it will be significantly less than patching, repatching and dealing with the problems of a leaky and non-code compliant roof. 

Original article and photo source: Roof Hugger 

Learn more about Roof Hugger in their Coffee Shop Directory or visit www.roofhugger.com.



Recommended For You


Comments

There are currently no comments here.

Leave a Reply

Commenting is only accessible to RCS users.

Have an account? Login to leave a comment!


Sign In
IRE - Banner - IRE 2025 _11.21.24
English
English
Español
Français

Sign Up for Our E-News!

Join over 18,000 other roofers who get the Week in Roofing for a recap of this week's best industry posts!

Sign Up
Wil-Mar - Sidebar Ad - Pipe Collar
IRE - Sidebar - IRE _ 11.21.24
SRS - Sidebar Ad (En Espanol Page) - ProFund
ServiceFirstSolutions-Grow-Sidebar
Pli-Dek - Sidebar - Only the Best - June
NFBA - Sidebar Ad - Accredited Builder