By Evelyn Witterholt.
KnuckleHead Mechanical Support Kits - Green Link Engineering
If you have customers who want their HVAC equipment mounted securely, Green Link Engineering has the mechanical support kit for you! Their kits not only keep HVAC equipment in place thanks to their KnuckleHead bases, but they also only take 15 minutes to install.
Here are two base assembly kits Green Link Engineering has to offer:
Green Link’s Elevated Mechanical Support Assembly can mount all kinds of HVAC equipment on the roof and ground. They can mount single HVAC units but they can also be modified with banks if multiple units need to be installed. They offer two base designs: a universal base with a 7-inch diameter and 38 square inches of surface area and a big base with a 12-inch diameter and 113.1 square inches of surface area. Along with installation hardware, their kit contains:
Four KnuckleHead bases (each holding up to 600 pounds)
Four 2’ stanchion supports
Two 4’ support rails
Two adjustable equipment rails
Their Low Profile Support System can support almost every type of mechanical equipment that is meant to be close to the surface of a roof. This includes AC units, heat pumps, condensers and more. It can mount equipment five inches above the surface and can support up to 850 pounds of equipment. It’s easy to install and the system can be leveled by simply rotating the KnuckleHead. Each kit contains:
Four Strut KnuckleHeads
Four support rails
Two equipment rails
Assembly hardware
Check out the KnuckleHead Mechanical Support Kits page to see the other kits Green Link Engineering has to offer.
Learn more about Green Link Engineering in their RoofersCoffeeShop® Directory or visit www.greenlinkengineering.com.
About Evelyn
Evelyn works as a writer for RoofersCoffeeShop, MetalCoffeeShop and AskARoofer. When she isn’t writing about roofing, she’s either at the gym lifting weights or curled up on the couch watching a movie.
Comments
Leave a Reply
Have an account? Login to leave a comment!
Sign In