Safely Work on Any Roof Project Using the FlashCo Total Grip Horizontal Lifeline System

By Anna Lockhart.  

The system was designed to provide the highest level of fall protection with a simple and easy install process!  

FlashCo is dedicated to providing their customers with the best product quality possible, and their Total Grip Horizontal Lifeline System was designed to give contractors the highest level of fall safety prevention possible while on the job.  

The system is an easy-to-install product that can be adapted to any work surface and area through a non-invasive installation. This system uses aluminum rivets or roof clamps and an aluminum base plate that is installed using posts made with integrated kinetic absorbers between the ends. The system is sturdy and allows roofing crews to move about the worksite area without having to disconnect from the line system.   

What makes this system unique and valuable is the ability to switch out panels that can adapt the equipment to fit a different style of roof. Whether your crew is working on a standing seam project one week and a low slope or trapezoidal roof the next, the system can easily be adapted to fit the current need. This system is designed to give both contractors and building owners peace of mind when it comes to the safety of the roofing crew as they work on the project at hand. 

The lifeline system has been certified and approved to meet all standards, including:  

• ANSI Z359.1-2007/ANSI Z359.6-2016 
• CSA Z259.16-2015 
• EN 795 2012, A&C 
• OSHA 1910.66 App C 
• OSHA 1926 Sub part M 

Check out the FlashCo YouTube channel to see the Total Grip Horizontal Lifeline System in action and how the roofing experts at FlashCo have thought ahead to meet any possible challenges you may face on the roof. They’ve got you and your team covered!