Lower On-Site Labor Costs with Monarch™ Batten Seam

By ATAS International, Inc.  

This simple one-piece installation panel is ideal for roofing and wall cladding applications. 

ATAS International continues to lead the industry with innovations in the manufacturing of metal walls, metal roof systems, ceilings, perimeter edge metal, accessories and more. One of their premier products is the Monarch™ Batten Seam panel which continues ATAS’s legacy for providing consistently high-quality products to customers on a daily basis. 

Monarch™ Batten Seam is a bold “batten” style panel with an integral batten and seam. The batten seam and lock are an integral part of the panel, and a vertical “leg” is formed as an extra water barrier. A clip is hooked over the leg; this allows for the expansion of the system. The panels interlock with each other. All clips and fasteners required to install the panel are concealed with the batten of the consecutive panel. Continuous panel lengths eliminate cross seams. Easy one-piece installation lowers on-site labor cost, and there are no extra caps or strips to install. Also, no special equipment is required to zip or seam the panels together. 

Product information

• 8”, 12” or 16” panel coverage 

• Stiffening ribs are standard, specify without 

• 2” seam height 

• 4’-0” minimum panel length 

• .032, .040, .050* aluminum 

• 24, 22*, gauge metallic coated steel 

• 24 gauge 55% Al-Zn alloy coated steel with acrylic coating 

• 16 & 20 ounce copper* 

• Choice of over 40 stock colors 

• Clear Satin and Dark Bronze Anodized 

• Custom colors and finishes available 

• Smooth 

• Stucco Embossed 

*Subject to minimum quantities and extended lead time. Inquire for material and panel coverage availability. 

Learn more about ATAS International in their RoofersCoffeeShop® Directory or visit www.atas.com.  

Original article source: ATAS International  

About ATAS International: 

For over 55 years, ATAS International, Inc. has built a sturdy reputation for offering quality products made by skilled and knowledgeable workers. This family-owned business began as a siding and trim installer, Aluminum Trim And Shapes, founded by Jacobus “Jack” P. Bus in his basement in Rochester, New York. Since then, the business has grown into an industry leading manufacturer of metal panels for the building envelope, with several locations across the United States and serving customers around the globe.