A Comprehensive Guide to Setting Up Your Catch-All System

By Cayden Wemple. 

If you are at a loss about installing your Catch-All system, take a look at this in-depth installation guide. 

The Catch-All is an intuitive roofing clean-up system that eliminates the number one complaint of all customers: leftover debris. If you are looking for some help with the installation process, this guide is sure to help! 

Install the gutter protection kit 

The first thing you are going to want to do is install The Catch-All gutter protection kit. The gutter protection kit protects from falling objects and will keep scratches off of gutters that are caused by ladders. According to The Catch-All instructional guide, for installation you should, “Start on one end of the run and tilt the protector 45 degree-slide into the gutter and rotate into position to make sure that the gutter hangers are positioned between the collection cups. Then, slide the protector left or right to accommodate. Repeat this process for additional gutter protectors with a slight overlap between pieces for the length of the run. Collection cups can also be nested together if a shorter length of protection is required.” 

Install the landscape protection kit 

You are going to start this installation by attaching the pull stoppers to the support poles. Don’t forget to attach the carabiners. The next step is to install the chute nets. The chute nets will guide lightweight debris off the roof and away from the home. Afterwards, you will break out the ground nets. The ground nets will be stabilized by the support poles set up earlier. Lean the support poles at a 60-degree angle around the house. The ground nets are designed for heavy loads so be sure that you lay them out on grass or concrete. The landscape nets can be used to cover any additional ground.  

Cleanup 

The Catch-All expedites the cleaning up portion of the job. The first step is to empty all the gutter protectors on the ground nets. The next step is to shake off any debris left on the chute nets onto the ground nets. Lastly, carry what’s in the ground nets to your dump trailer.  

Watch the full installation guide here.